Torque ripple analysis of a PM brushless DC motor using finite element method

Min Dai, A. Keyhani, T. Sebastian
Dept. of Electr. Eng., Ohio State Univ., Columbus, OH, USA

This paper appears in: IEEE Transactions on Energy Conversion
Publication Date: March 2004
On page(s): 40 - 45
Volume: 19, Issue: 1
ISSN: 0885-8969
Inspec Accession Number: 7911541

Abstract:
Three-phase permanent magnet brushless DC motors are widely used. As a function of the rotor position, the torque produced by these machines has a pulsating component in addition to the DC component. This pulsating torque has a fundamental frequency corresponding to six pulses per electrical revolution of the motor. The shape of the torque waveform and, thus, the frequency content of the waveform can be influenced by several factors in the motor design and construction. This paper addresses the various factors that influence the torque waveshape. It is shown that in addition to the basic induced electromotive force (EMF) waveshape, the magnetic saturation in the stator core, and the accuracy in the skewing are also key factors in determining the torque waveshape. Computer simulation using finite element technique has been conducted to study the torque waveform. Simulation results successfully duplicated the torque waveforms measured in experiments under different excitation currents.